The Renegade was designed specially for hunters that want a supremely accurate small diameter carbon arrow that is tough as nails - at a great price. This shaft was designed to eliminate cross-wind drift. It’s perfect for those long range shots. The flight characteristics of this extremely durable shaft ensures maximum power down-range.
STRAIGHTNESS OR STRAIGHTER
GRAIN WEIGHT TOLERANCE
FLETCHED ARROWS INCLUDE:
Black Eagle Arrows "R" Nock 10 -Orange- Grains
Stainless Steel Bone Crushing Half-Outs - 56 Grains
To install the Half-Out.
Square the end of the arrow shaft
Dry fitting is recommended on all components. Slide half-out in shaft and spin test (if you prefer)
If a slight wobble is noticed, DON'T PANIC! Rotate the half-out with field point installed until the spin is true.
Again, Rotate Half-Out until it spins perfect.
Use a Silver or Black Sharpie and mark the Shaft and the Half-Out for perfect alignment once glue is applied.
We have tested Our fletching glue, insert/outsert glue and epoxy and all of them work great.
Apply a even amount of glue around the shaft of the Half-Out to ensure the glue channels get enough glue in them to hold.
Once the glued half-out is finished stand the arrow on the point to dry.
Marked for a perfect Spin Step#5
Not sure what size is right for you. Check out our sizing chart.
Hot Melt is NOT recommended for use with Black Eagle Arrow shafts.